One of the best replacements for Freon is a product called Bluon, otherwise referred to as TDX 20. It is a chemically derived replacement product that is just as good, if not better, then Freon is as a coolant. If you have a business where you are using equipment that is producing a substantial amount of cold air, you will certainly want to consider using this product with all of your machines. Moreover, when 2020 comes, you are going to be faced with the necessity of taking all of the chlorofluorocarbons out of your existing machines and replacing it with something that will work just as well. This is why the makers of TDX 20 have come so far and become so successful. This is a quick overview of the equipment and installation benefits of using the TDX 20 refrigerant in all of your machines.
Why Does R-22 Need To Be Replaced?
R-22 needs to be replaced for several different reasons. First of all, it is a chlorofluorocarbon. Freon was first used as one of the most prominent coolants in the world. However, once it was discovered that it was primarily contributing to the depletion of the ozone layer in the atmosphere, measurements were taken to find replacements for this product. Freon is easy to make, and it is also inexpensive, and these are two of the most important reasons that it was so successful on the market. However, this layer of the atmosphere is what protects the earth from ultraviolet rays that could be harmful. It blocks most of them, and when holes began to appear in this layer, something needed to be done. It was only after years of research and monitoring that they were able to determine that Freon was the main reason this was happening. Aerosol cans were first taken out of commission, and subsequently, we are now required to replace these chlorofluorocarbons found in R-22 with a comparable replacement.
The Benefits Of Using TDX 20
This product is an excellent replacement for everything that has R-22. Whether you have a large business, or a small business, if you are using any type of refrigeration system with coolants, you likely have Freon inside. Therefore, you will have to contact a local HVAC company to come out to evaluate the situation. If they determine that you do actually have this chlorofluorocarbon inside, it will need to be replaced immediately. Most of the companies that do this have already done hundreds of replacements. You could be in a large city, or a small rural area, and they will know exactly what to do. It takes specialized equipment to extract it, preventing it from getting lost in the atmosphere. The moment that this liquid is released, and is no longer under pressure, it will change into its gaseous form. These professionals will capture this, preventing it from getting airborne, and will replace it with TDX 20. Although this could be initially expensive, depending upon the number of machines that you have, it will ultimately save you an incredible amount of money. Many studies have been done that shows that it can be around 25% more efficient than using Freon, plus it has a virtually identical appearance on a chemical level to R-22, making it the perfect replacement. In some cases, oil changes will be necessary. This is no longer the case. It will operate at lower temperatures, and also lower pressures, and this will cut back on the wear and tear on the machines that you are using. Vibration levels will also be reduced and you will definitely notice that. This will boost the stability of any system that you have. This is EPA and ASHRAE approved, and with that type of endorsement, you can clearly see that this is an excellent product.
How Can You Find A Professional To Help You Do This?
In order to do this installation, they need to have the necessary equipment. They should also have several employees that have gone through the proper training to remove the Freon. You can find them on the web very quickly, or you could go through your local phone directory, simply looking for a heating ventilation and air conditioning specialist. If they are also known for doing refrigeration units, then this is certainly a company that you will want to get a quote from. They can tell you over the phone how much it will cost, and give you an estimate as to how long it will take to remove R-22 from your system. Just make sure that they are replacing this with Bluon as this is the most efficient coolant replacement on the market today. There are some that will not use it because it is much more expensive, but they are not looking at the big picture.
Why Bluon Is The Best Choice For A Replacement Coolant
The main reason that TDX 20 is the most likely replacement is that it is the most efficient. As mentioned before, it’s going to reduce the amount of wear and tear that can happen on your machines, and at the same time, it’s going to use less energy. This means that you will not have to replace your refrigeration systems as soon as you would think, plus you are going to be operating them at a much lower cost. Even though you are going to pay more for this particular coolant over all of the other potential replacements, you will not be dissatisfied at all with the results.
This brief overview of why you should replace R-22 with TDX 20 should prompt you to start contacting local HVAC professionals. They will be more than happy to provide you with a quote either by email or over the phone. Be sure to tell them what type of machines that you have, and where you are located, so that they can give you an exact price quote regardless of where you live. This will be one of the most important decisions that you make, plus you are going to be compliant with the law. You can no longer use chlorofluorocarbons in your refrigeration machines because of the ozone layer depletion that it will cause. Therefore, you are going to be completely compliant, and you will inevitably start making more money with your business as a result of saving money on your operating costs.